Custom Diameter and Slot Barrel Adapter – to 1/2-28 Thread (Black)
$74.18
888 Customers Have Purchased This Item!
Quickly and easily convert your non-threaded barrel with a front sight to 1/2″-28 threads so you can attach muzzle brakes and other end-of-barrel accessories.
No machining required, and less expensive than going to a machinist or gunsmith to thread your barrel.
Watch the installation video HERE
Here is a short video on how to use calipers – HERE
Product Description
Now you can mount any 1/2″-28 end-of-barrel accessory on your rifle’s non-threaded barrel with a front sight. Muzzle brakes, flash suppressors, compensators, sound suppressors, fake flash hiders and suppressors or any other legal item – with this high-quality barrel thread adapter.
This barrel thread adapter easily attaches to the factory-finished plain muzzle using two set screws. You can install it yourself in seconds and be removed just as quickly.
Based on precise measurements you provide after ordering, we can custom machine this barrel thread adapter to match your barrel’s diameter and sight measurements.
Thread Adapter Features and Benefits
- Custom diameter to fit barrels from .500 up to 1.125 inch O.D.
- Threads: 1/2″-28 TPI
- Thread Length: 5/8″
- Bore Depth: .9 inches
- Through Bore: Fits up to .25 caliber
- Custom-machined to fit your non-threaded barrel.
- Has a cutout to fit around the front sight.
- MIL-SPEC black oxide finish for years of trouble-free service.
- Slip-on design is held in place with two set screws that remain flush when tightened.
Instructions After Ordering
To ensure a proper fit, please put the required information in the measurements section at the bottom of the checkout page.
- Barrel Diameter – Precise measurement at the muzzle and 1 inch back. ***Can be from .500 up to 1.125 inch diameter***
- Caliber
- Sight – Width of the front sight (widest measurement) and the step from the muzzle to the front of the front sight.
- Firearm Model
Note: Measure using quality metal (NOT plastic!!!) calipers or a micrometer to ensure a proper fit.
Don’t worry, if you do not provide measurements during checkout, we will send you an email asking for the missing information.
***ALERT*** You MUST provide measurements (inch or metric) to three decimal places (Example 0.687 because .68 will not fit)
Two decimal place (Ex 0.60) measurements will be suspect, but we will machine to your measurements and add proper clearance.
Rework fee is $20 and you pay for return shipping.
No refunds on parts that don’t fit because of your measurements.
Additional Information
| Weight | 4 oz |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Custom Firearm Parts
Note: It is your responsibility to review and follow all United States of America federal, state, and/or local laws and regulations related to the use, possession, purchase and/or ownership of restricted items. And of course, be safe and have fun.
Reviews
There are no reviews yet.