S&W M&P15-22 Breech Block Wrench
Original price was: $32.09.$27.00Current price is: $27.00.
1956 Customers Have Purchased This Item!
Made for the 15-22 Pistol, but can be used on the Rifle as well
Quickly and easily tighten the factory barrel nut with our barrel nut wrench.
Remove or replace the handguard on your Smith & Wesson (S&W) M&P15-22 using the S&W M&P15-22 Breech Block Wrench by Tacticool22.
This is the original and only one available
CAUTION: Do NOT hold any 15-22 by the upper or lower receiver for doing any barrel work!!! DO NOT OVERTIGHTEN.
You must use our Breech Block Wrench for the pistol. Otherwise you can ruin your pistol.
You must use this tool gently. Tighten the barrel nut to no more than 20 Ft. Lbs. of torque. Or hand tight plus 1 “hour on a clock face” with a wrench on our barrel nut wrench.
Any tighter and you risk ruining things. If the feed ramp “jumps” out of the slot…you have tightened it way too much and we will not accept any responsibility for any damage to anything.
Product Description
This Breech Block Wrench is made for ALL S&W M&P 15-22 versions, but specifically for the Pistol
It can be used on EVERY version of the 15-22.
Pistol, Rifle, Performance Center (PC) Quad rail (version 1) M-LOK rail (version 2)
Using the S&W M&P 15-22 Breech Block Wrench by Tacticool22, you can:
- Tighten a loose barrel nut on the S&W M&P15-22 without having to clamp on the barrel. This is helpful if accuracy is starting to deviate or you’re getting a lot of “flyers.”
- Remove the factory barrel nut on the S&W M&P 15-22 to remove the barrel for a thorough cleaning.
- Replace the stock S&W M&P15-22 handguard with a free float or 2-piece handguard, when using the Tacticool22 Free Float Handguard Converter (sold separately or in kits) or one the Tacticool22 Aluminum Free Float Hand Guards built specifically for the 15-22.
CAUTION: Do NOT hold any 15-22 by the upper or lower receiver for doing any barrel work!!! DO NOT OVERTIGHTEN.
Only use our Breech Block Wrench for the pistol. Otherwise you can ruin your pistol.
You must use this tool gently. Tighten the barrel nut to no more than 20 Ft. Lbs. of torque. Or hand tight plus 1 “hour on a clock face” with a wrench on our barrel nut wrench.
Any tighter and you risk ruining things. If the feed ramp “jumps” out of the slot…you have tightened it way too much and we will not accept any responsibility for any damage to anything.
Our Tacticool22 Barrel Vise Jaws work great for holding your rifle in vise jaws when the hand guard is removed.
S&W M&P15-22 Breech Block Wrench Features
- The lugs of the Breech Block Wrench are designed to fit snugly on the S&W M&P15-22 breech block, with minimal movement.
- There is a cutout for the ejector bar
- The outside of the Breech Block Wrench fits nicely inside the stock S&W M&P15-22 upper.
- There are two wrench flats for use in a bench vise. Or 27/32 or 21mm open end wrench
- Can be used with ALL versions of the 15-22
- Simple, step-by-step instructions are included.
- Machined from the highest quality U.S. aluminum stock available.
Additional Information
| Weight | 11 oz |
|---|---|
| Firearm Compatibility | Smith & Wesson M&P15-22 |
| Material | Aluminum |
| Instructions | This is used when the barrel is inaccessible so you can tighten a loose barrel nut or flash hider. Or remove the barrel nut or flash hider to fully clean every crevice or install one of our 15-22 specific hand guards or free float hand guard adapter nut. You need a good quality bench vise that is mounted solidly. There is nothing that needs to be torqued beyond 20 Ft. Lbs. The crush washer will have the highest torque value. Over-torquing WILL lead to catastrophic damage. Use the tool with care and forethought. 1. Clamp the Breech Block Wrench with the notch towards you |
Only logged in customers who have purchased this product may leave a review.
Related products
Note: It is your responsibility to review and follow all United States of America federal, state, and/or local laws and regulations related to the use, possession, purchase and/or ownership of restricted items. And of course, be safe and have fun.
Reviews
There are no reviews yet.