5/8-24 Barrel Thread Adapter for Remington 700 5/8″ Barrels – Stainless

Product Description

Now you can mount any 5/8″-24 end-of-barrel accessory on your Remington 700 rifle—including muzzle brakes, flash suppressors, compensators, sound suppressors, or fake flash hiders and suppressors or any other legal end of barrel device—with this high-quality barrel thread adapter.

This barrel thread adapter easily attaches to a Remington 700 plain muzzle using set screws. Removal of existing front sight may be required.

Thread Adapter Features

• Threads: 5/8″-24 TPI
• Thread Length: 5/8″
• Finish: “As turned” finish for years of trouble-free service.
• Fits Remington 700 non-threaded barrels that measure exactly .625 inches. If it does not…go HERE
  • Bore Depth: .9 inches
  • Outside Diameter: 1 inch
  • Clearance for .375 inch or 9mm
• Slip-on design is held in place with two set screws that remain flush when tightened.
• Less expensive than going to a machinist or gunsmith to thread your barrel.
• Install it yourself in seconds, and remove it just as quickly.

Remington 700 Barrel Measurements

We recommend that you measure your Remington 700 barrel with a quality metal caliper or micrometer to verify that the barrel measures .625 inches.

If the barrel is bigger, smaller, or tapered, go HERE