Barrel Extension Vented – Non-Threaded (Slip-on)
$46.30 – $59.99
10 Customers Have Purchased This Item!
This slip-on Barrel Extension gives your firearm the look of a real suppressor, without the expense or waiting period. ALL rifles and pistols with non-threaded barrels.
Also Known As Barrel extension if you pin and weld it.
Does not quiet your firearm! This is a fake suppressor.
Here is a short video on how to use calipers – https://www.youtube.com/watch?v=BBIFgOJ7W78&list=PLNVIzkALwP7Dj41m0mxLMvS44u7LYxhut&index=5&t=0s
Product Description
The slip-on Tacticool22 Barrel Extension Vented fits AR-10, AR-15, S&W M&P 15-22 and any other firearm with a barrel diameter from .500 inch to .800 inch
Any rifle or pistol with at least 3/4″ of exposed barrel
Note: For custom orders, your rifle’s barrel diameter can be anywhere from .5 up to .8 inch. Just tell us your barrel diameter upon ordering to ensure a proper fit.
Fake Suppressor Features
- Lengthens the barrel.
- Black, hard-coat anodized finish to MIL-SPEC Type III.
- Quickly and easily secures onto your barrel. Held in place using a set screw.
- Does not quiet the firearm. (There’s a BUNCH of holes)
- Does not interfere with gas or piston systems.
- Made in the USA.
Barrel Extension Measurements
We offer multiple measurements and bore options to ensure a proper fit for your firearm. If you’re not sure which options to pick, contact us.
- Non-threaded
- Length:
- 4.5″
- 6″
- 8″
- Bore (Barrel Diameter):
- S&W M&P 15-22
- Performance Center S&W M&P15-22
- .625 inches (5/8″)
- Custom bore – From .5 inches up to .8 inches.
Instructions After Ordering
To ensure a proper fit, please put the required information in the measurements section at the bottom of the checkout page.
- Barrel Diameter – Precise measurement at the muzzle and 1 inch back.
- Caliber
- Firearm Model
Note: Measure using quality metal calipers or a micrometer to ensure a proper fit.
Don’t worry, if you do not provide measurements during checkout, we will send you an email asking for the missing information.
Additional Information
| Weight | 0.5 oz |
|---|---|
| Dimensions | 0.666 × 0.125 × 0.125 in |
| Bore | .625 = 5/8 inch, Performance Center S&W M&P15-22, S&W M&P15-22 (Does Not Fit Performance Center with Fluted Barrel), Custom Bore |
| Caliber | .22, .223/5.56mm, .25/6.5mm, .30/7.62mm, .308/7.62mm |
| Color | Black |
| Finish | Hardcoat Anodized to MIL-SPEC Type III |
| Firearm Compatibility | Any from .5 to .8 Inch, AR .308, AR-10, AR-15, Mossberg 715T, Pistols with 3/4" exposed barrel, Ruger 10/22 Carbine, Ruger SR-22, Smith & Wesson M&P15-22 |
| Material | Aluminum |
| Length | 4.5 Inch, 6 Inch, 8 Inch |
| Thread Pattern | Non-Threaded |
Only logged in customers who have purchased this product may leave a review.
Measurement Requirements are needed ONLY for Custom Bore and/or Custom Length
Please include the following information in the Order Notes during checkout or email us at [email protected]/* */ immediately after your purchase.
- Muzzle diameter
- Barrel diameter 1 inch from muzzle –
- Custom Length – Due to firearm variations, you must measure your barrel length from the muzzle back to where you want the barrel shroud to end.
You must measure your barrel diameter with quality metal calipers or micrometer to ensure a proper fit.
ATTENTION: If you do not provide measurements during checkout, we will send you an email asking for the missing information. If you provide incorrect measurements and this item does not fit, you will have to pay return shipping. Plus there will be a $20 fee for additional machining and shipping back to you.
Related products
Custom Firearm Parts
Note: It is your responsibility to review and follow all United States of America federal, state, and/or local laws and regulations related to the use, possession, purchase and/or ownership of restricted items. And of course, be safe and have fun.
Reviews
There are no reviews yet.