Fake Suppressor – Non-Threaded (Slip-on)
$46.30 – $69.99
690 Customers Have Purchased This Item!
This slip-on Fake Suppressor gives your firearm the look of a real suppressor, without the expense or waiting period. Fits AR-10, AR-15, M&P15-22, and other rifles with non-threaded barrels.
Will allow ANY caliber if it can slip on the barrel
Also Known As Barrel extension if you pin and weld it.
Does not quiet your firearm! This is a fake suppressor.
Here is a short video on how to use calipers – https://www.youtube.com/watch?v=BBIFgOJ7W78&list=PLNVIzkALwP7Dj41m0mxLMvS44u7LYxhut&index=5&t=0s
Product Description
The slip-on Tacticool22 Fake Suppressor fits AR-10, AR-15, S&W M&P 15-22 and any other firearm with a barrel diameter from .355″ (9mm) up to .800″ (20.3mm)
Any rifle or pistol with at least 3/4″ of exposed barrel
Note: For custom orders, your rifle’s barrel diameter can be anywhere from .355″ (9mm) up to .800″ (20.3mm)
Just tell us your barrel diameter upon ordering to ensure a proper fit.
Fake Suppressor Features
- Lengthens the barrel.
- Black, hard-coat anodized finish to MIL-SPEC Type III.
- Quickly and easily secures onto your barrel. Held in place using a set screw.
- Does not quiet the firearm.
- Does not interfere with gas or piston systems.
- Made in the USA.
- Caliber – ANY
Fake Suppressor Measurements
We offer multiple measurements and bore options to ensure a proper fit for your firearm. If you’re not sure which options to pick, contact us.
- Non-threaded
- Length:
- 4.5″
- 6″
- 8″
- 10.75″
- Custom length – up to 10.75″
- Bore (Barrel Diameter):
- S&W M&P15-22 (we already have the measurement)
- Performance Center S&W M&P 15-22 (we already have the measurement)
- .625 inches (5/8″)
- .750 inch (your standard 3/4″ AR barrel)
- Custom bore – From .355″ (9mm) up to .800″ (20.3mm)
Instructions After Ordering
To ensure a proper fit, please put the required information in the measurements section at the bottom of the checkout page.
- Barrel Diameter – Precise measurement at the muzzle and 1 inch back.
- Caliber
- Firearm Model
Note: Measure using quality metal calipers or a micrometer to ensure a proper fit.
Don’t worry, if you do not provide measurements during checkout, we will send you an email asking for the missing information.
Additional Information
| Weight | 0.5 oz |
|---|---|
| Dimensions | 0.666 × 0.125 × 0.125 in |
| Bore | .625 = 5/8 inch, Performance Center S&W M&P15-22, S&W M&P15-22 (Does Not Fit Performance Center with Fluted Barrel), Custom Bore |
| Caliber | .22, .223/5.56mm, .25/6.5mm, .30/7.62mm, .308/7.62mm |
| Color | Black |
| Finish | Hardcoat Anodized to MIL-SPEC Type III |
| Firearm Compatibility | AR .308, AR-10, AR-15, Mossberg 715T, Ruger 10/22 Carbine, Ruger SR-22, Smith & Wesson M&P15-22 |
| Material | Aluminum |
| Length | 10.75 inch, 4.5 Inch, 6 Inch, 8 Inch, Custom length up to 10.75 inches overall |
| Thread Pattern | Non-Threaded |
2 reviews for Fake Suppressor – Non-Threaded (Slip-on)
Only logged in customers who have purchased this product may leave a review.
Measurement Requirements are needed ONLY for Custom Bore and/or Custom Length
Please include the following information in the Order Notes during checkout or email us at [email protected]/* */ immediately after your purchase.
- Muzzle diameter
- Barrel diameter 1 inch from muzzle –
- Custom Length – Due to firearm variations, you must measure your barrel length from the muzzle back to where you want the barrel shroud to end.
You must measure your barrel diameter with quality metal calipers or micrometer to ensure a proper fit.
ATTENTION: If you do not provide measurements during checkout, we will send you an email asking for the missing information. If you provide incorrect measurements and this item does not fit, you will have to pay return shipping. Plus there will be a $20 fee for additional machining and shipping back to you.
Related products
Barrel Shrouds
Custom Firearm Parts
Note: It is your responsibility to review and follow all United States of America federal, state, and/or local laws and regulations related to the use, possession, purchase and/or ownership of restricted items. And of course, be safe and have fun.
John Schretzlmeir (verified owner) –
I live in NJ and purchased a PTR – 9, however it must have a 16″ barrel on it. It looks funny with the skinny barrel so I bought this to slip over the barrel to make it look like a suppressed MP5. It looks great, and fits great using the custom measurements.
Robert Newton (verified owner) –
WoW! Looks good, and fits good.