1/2-28 Barrel Thread Adapter for 1/2″ Barrels – Black

Product Description

Now you can mount any 1/2″-28 TPI end-of-barrel accessory on your rifle’s non-threaded 1/2″ barrel—including muzzle brakes, flash suppressors, compensators, sound suppressors, or fake flash hiders and suppressors—with this high-quality barrel thread adapter.

This barrel thread adapter easily attaches to the factory-finished plain muzzle using two set screws.

Thread Adapter Features and Benefits

• Threads: 1/2″-28 TPI
• Thread Length: 5/8″
• Bore Depth: .9 inches
• Through Bore: Fits up to .25 caliber
• Outside Diameter: 1 inch
• Fits 1/2″ non-threaded barrels. Ensure that your barrel measures .500 inch or 12.7mm. This can be machined larger (by you) if needed.
• MIL-SPEC black oxide finish for years of trouble-free service.
• Slip-on design is held in place with two set screws that remain flush when tightened.
• Less expensive than going to a machinist or gunsmith to thread your barrel.
• Install it yourself in seconds, and remove it just as quickly.

Note: If your rifle has a front sight that is more than 1″” behind the muzzle, this thread adapter will still fit.